Key Features
Aguaflo Membioprocess is based on use of Submerged membranes for solid liquid separation. It belongs to Membrane Bioreactor (MBR) family Low Footprint and high reuse quality water treatment. Design of Aguaflo MEMBIO is done to carter Sewage Treatment requirement of single family to full fledge community.
How Aguaflo Membio Membrane Works?
- In the Bioreactor, clean water gets collected in the hollow fiber cavity, leaving the biomass outside
- Backwash is regularly applied to prevent clogging (fouling) of hollow fiber membrane
- High MLSS (6,000 12,000 mg/L) => low HRT => small reactor volume => small plant footprint area
- Biomass separation is independent of settling, is done using MBR Membrane (micro or ultrafiltration)
- Biomass is completely retained, In treated water TSS (< 1 mg/L) and turbidity (< 1 NTU) is very low. l Automatic operation, operator requirements are reduced
- Due to elevated SRT( Solid / Sludge Retention time) less prone to problems associated with nitrification and toxic or less biomass yield => less sludge l Due to high MLSS, shock loads can be easily handled
- Better SRT control since no escape of TSS as occasionally observed from secondary clarifiers
- Can also remove nitrogen and phosphorus with the addition of anaerobic and anoxic zone.
Feature
- Fast delivery and start-up due to the mobile concept
- Compact design
- High packing density
- Treated waste water contains irrigation water quality
- Very good price-performance ratio
- Low maintenance and minimum operation requirement
- Minimum construction work on site and easy to relocate
Advantage
- Extremely low space requirement Simple construction makes for easy repair and replacement l Custom design and low capital and operation cost makes AGUAFLO MEMBIO installation in most difficult location easier l Low sludge generation compared to conventional treatment process l Treated water quality ideal for flushing and other non-potable applications. l Plants can be underground, over ground, basement based etc.